My Cart

Close

Phantom Flex4K Kit

Daily:  $3,500.00
Weekly:  $10,500.00
Quantity
- +

"Before using this camera, make sure you have plenty of hard drives and even more light. The Flex4K has the ability to shoot 4K up to 1000fps on a Super 35 sensor, which can make even the most mundane things look fascinating in ways you’d never thought possible. This camera is not for first-time users though, and I recommend a day or two of familiarizing yourself with its controls and workflow, as it is not as straightforward as other cameras. When lighting for 1000fps, plan on more light than you think necessary. Maybe accommodate for that second or third 5000W light, or even the sunniest of days."

- Eric Silver, Lead Tech 

**Requires trained Phantom Technician to accompany every camera rental.** 

  • (1) Phantom Flex 4K Camera Body
  • (1) 12″ Dovetail Plate
  • (1) Ronford Baker Quick Release
  • (1) 15mm Cinestyle Riser
  • (1) 19mm Bridgeplate
  • (2) 24V 3pin XLR AC Power Supply w/OSHA Cable 
  • (1) 25′ Phantom Ethernet Cable
  • (1) Atto Thunderbolt Link
  • (2) Cinestation Ethernet Cable 
  • (1) Phantom Flex 4K PL Mount
  • (1) Phantom Pickle Switch
  • (1) Short BNC Viewfinder Cable 
  • (1) Viewfinder Power Cable
  • (1) Vision Research Cinestation
  • (1) Wooden Camera EVF Bracket
  • (1) Wooden Camera Top Handle
  • (1) 24V AC Power Supply w/OSHA Cable
  • (1) ATTO Power Supply w/OSHA Cable
  • (2) Thunderbolt Cable 
  • (2) Short CAT 6 Ethernet Cable 
  • (1) 2′ Phantom Ethernet Control Cable
  • (1) 12′ Phantom Ethernet Control Cable
  • (1) 100′ Phantom Ethernet Control Cable
  • (1) 24V 3pin XLR Extension (Panavision Polarity)
  • (2) 100′ Phantom Loom 
  • (2) Pelican 1050 
  • (1) Sync Break Out Box
  • (4) Viewfinder P-Tap Power Cable 

 

$3,500.00 Day/Weekend Rate
$10,500.00 Week Rate
$31,500.00 Month Rate

  • Throughput/Speed:

9 Gpx/second.

Max speed at full resolution of 4096 x 2304 is 938 fps

At 4096 x 2160 max speed is 1000 fps

At 2048 x 1080 max speed is 1977 fps

  • Sensor Specifications:

CMOS sensor

4096 x 2304 pixels

6.75 µm pixel size

27.6 mm x 15.5 mm

Super-35mm; 31.7mm diagonal

Super-16mm format at 1920 x 1080

Base ISO Color 200D; 250T

Exposure index range 250-1250

Recommended EI 800-1000 Color

Base ISO Monochrome 800D; 2000T

12-bit

  • Exposure:

Exposure time (shutter speed): 5μs to 1/frame rate

Can be set in degrees or microseconds (μs)

1-millisecond progressive scan (aka rolling) shutter

  • Memory:

High-speed internal RAM

CineMag V (2TB, 8TB), CineMag IV, CineMag IV PRO for non-volatile storage (1TB, 2TB)

  • Record Times:

5 seconds at 1000 fps, 4096 x 2160 resolution and into 64 GB of internal memory

2TB CineMag IV holds 2 hours of 4K Cine raw playback at 24p

2TB CineMag IV holds over 4 hours of 4K ProRes HQ playback at 30p

  • Special Features:

3 main 3G HD-SDI outputs, supports dual-link 4K video and simultaneous live monitoring/playback

HD-SDI can switch between Rec709 and Log

Supports both HD-SDI and component-based viewfinders

Standard internal mechanical shutter for automatic/remote Current Session Reference (CSR)

Secondary IP address

Segment memory for multi-cine acquisition

Field-based firmware upgrade capable

Several mounting holes for accessories on camera body

  • Triggering:

Programmable trigger location (pre/post trigger recording)

Trigger from camera body or via software

Hardware trigger via Sync port

Trigger inputs also available on 3-pin accessory ports

  • Timing and Synchronization:

Frame synchronization to internal or external clock (FSYNC)

Genlock sync available through HD-SDI return signal

IRIG in/out (modulated or unmodulated)

SMPTE time code support

  • Signaling:

4x 3G HD-SDI output BNCs (one reserved for viewfinder)

1x 3G HD-SDI return BNC, supports Genlock

Sync connector for Trigger, time code, F-sync, AES/EBU Audio (via MiniBob or Capture cable)

Remote (RCU) port

Component viewfinder port

Four Aux ports for power and trigger

(2x 12VDC and 2x 24V)

  • Connectivity:

Gb Ethernet for both control and data

10Gb Ethernet on CineStation IV

  • Camera Control:

Phantom Camera Control (PCC)

On-Camera Controls

Remote Control Unit (RCU), connects direct to camera

SDK available

  • Video Out:

3 main 3G HD-SDI, supports dual-link 4K video or 3x scaled 1080p outputs.

Additional HD-SDI reserved for viewfinder

Component viewfinder port

Video outputs switchable between Rec709 & Log

  • Lensing:

PL-mount standard

  • Video Processing:

Brightness

Gain

Gamma

Saturation

Color temperature

Color matrix

Tone curve

Log mode

Image flip and rotate in PCC

Crop & Scale

  • Supported File Formats:

Cine raw and Apple ProRes 422 HQ CineMag recording

PCC Cine file conversion to: Cine Compressed, Cine RAW, AVI, h.264 mp4, Apple ProRes .mov, Multipage TIFF, MXF PAL, MXF NTSC,

Uncompressed QuickTime, Windows BMP, OS/2 BMP, PCX, TGA, TIFF, LEAD, JPEG, JTIF, RAW, DNG, DPX

  • Dimensions (LxWxH) (Body Only):

12”x6”x8”

  • Weight (Body Only):

13 lbs +/-